Maximum availability of your production equipment with regular maintenance.

Baumer hhs provides its customers with the right service. Matched to your requirements, you will receive the right maintenance package.

Secure your production with the maintenance service from Baumer hhs. We work according to fixed maintenance plans and replace wearing parts with original Baumer hhs parts.

Your customers expect you to provide a high availability of your production equipment and a consistant documentation of all maintenance work. Baumer hhs certifies your adhesive application and quality assurance systems.

Together with you on site, the Baumer hhs service engineer compiles a list of required spare parts sets, which you can order at attractive conditions and keep ready at your stock.

The QA maintenance is carried out on site. A maintenance protocol proves the proper functioning of the complete system and serves as proof to the customer.

The protocol is accepted at ISO certifications.

Executed work:

Controller

• Checking for mechanical damage
• Checking all inputs and outputs
• Checking all system parameters
• Calibrating Touch Screen

QA Modules

• Checking for mechanical damage
• Checking all wires for damage
• Checking the detection of defective products

Sensors

• Checking for mechanical damage
• Checking all wires for damage
• Function test of all connected sensors

Ejector (only hhs products)

• Checking for mechanical damage
• Checking all wires for damage
• Replacement Parts
• Function test

The glue maintenance is carried out on site. A maintenance protocol proves the proper functioning of the complete system and serves as proof to the customer.

The protocol is accepted at ISO certifications. 

Executed work:

Controller

• Checking for mechanical damage
• Checking all inputs and outputs
• Checking all system parameters
• Data backup, related to controller

Pumps cold glue

• Flushing the system 
• Replacing filter (pre- and mainfilter)
• Function test pump and regulator

Application heads cold glue

• Checking for mechanical damage
• Electrical check module
• Check/replacement of parts 
• Cleaning application head
• Function test

Hot melt melter

• Checking for mechanical damage
• Checking for leakages (air/glue)
• Replacing filter (pre- and mainfilter)
• Flushing the system (cleaning the tank)
• Function test (pump/bypass)
• Controll of HM hoses (resetting the operating hours)
• Flushing HM-hoses

Application heads hot melt

• Checking for mechanical damage
• Check/replacement of parts
• Function test
• Resetting the operating hours

The service of Baumer hhs

Your competent and friendly partner.

Your Service Contact